Skip to main content
Interior Remodeling

Interior Remodeling in Tacoma & Greater Seattle

Open up a floor plan, finish a basement, upgrade every surface — we handle the full scope of interior renovation from framing to final coat of paint.

5.0/5 (12)
60 Yrs Experience
Licensed & Insured
FREE Estimates

What We Handle in an Interior Remodel

Every surface, every system, every detail between your exterior walls.

Structural & Layout Changes

  • Load-bearing wall removal — Engineer-sized LVL or steel beams with proper post-to-foundation load paths. No sagging headers, no guesswork.
  • New partition walls — Framing, insulation, drywall, and finishing for new rooms, closets, or defined spaces within an open floor plan.
  • Door and opening modifications — Widening doorways, adding arched openings, converting windows to pass-throughs, or reframing header heights for taller doors.

Drywall, Texture & Paint

  • Full drywall installation — Hang, tape, mud, and sand to a Level 4 or Level 5 finish depending on the final surface treatment. We match existing textures (orange peel, knockdown, smooth) when patching into existing walls.
  • Interior painting — Primer, two coats of finish, cut-in ceilings and trim. We use quality paint (Benjamin Moore, Sherwin-Williams) and prep every surface properly — no painting over peeling or damaged substrates.
  • Ceiling work — Popcorn removal, smooth skim coats, coffered ceilings, or tray ceilings with crown molding. We can also install tongue-and-groove wood ceilings for a warm, craftsman look.

Flooring & Subfloor

  • Subfloor repair — We pull up old flooring and assess the subfloor. Soft spots, squeaks, and uneven areas get fixed before any new material goes down. Self-leveling compound for concrete slabs; plywood replacement for wood-framed floors.
  • Material installation — Hardwood (nail-down or engineered), luxury vinyl plank, tile (porcelain, ceramic, natural stone), and carpet. We handle transitions between different flooring types cleanly and install baseboards and shoe molding to finish.
  • Hardwood refinishing — If your existing hardwood is in good shape under old carpet or worn finish, we can sand, stain, and refinish rather than replace — saving material cost while achieving a fresh look.

Trim, Millwork & Finishing

  • Crown molding & baseboards — MDF, primed pine, or hardwood. We cope inside corners (no mitered gaps that open up) and use finish nails with filled and sanded nail holes. Clean, tight lines throughout.
  • Wainscoting & paneling — Board-and-batten, shaker-style, raised panel, or shiplap. These add character to hallways, dining rooms, and staircases — especially in Tacoma's craftsman and mid-century homes.
  • Built-in shelving & cabinetry — Custom bookcases, entertainment centers, window seats, and mudroom storage. Designed to fit your space exactly and finished to match the rest of the trim in your home.

Interior Transformations

From closed-off floor plans to modern, open living spaces — here's the kind of work we do.

Interior remodel showing open floor plan with new flooring and paint in Tacoma home

Why Homeowners Choose Interior Remodeling

Many Tacoma-area homes were built in the 1950s–1980s with compartmentalized floor plans that feel cramped by today's standards. Removing a wall between the kitchen and living room, replacing carpet with hardwood, and updating trim can make a home feel twice as large — without adding a single square foot.

We also see a lot of homeowners who love their neighborhood and lot but have outgrown their home's layout. Instead of moving, they reconfigure interior spaces to match how their family actually lives today: home offices, playrooms, open-concept entertaining areas, and modernized bedrooms.

Interior Remodel Cost Factors

Interior remodeling costs vary widely based on scope. Here's what drives your number.

Structural Work

Removing load-bearing walls with engineered beams is one of the higher-cost items in an interior remodel. A single beam and post install can range from $3,000–$8,000 depending on span and load. Non-bearing wall removal is significantly less.

Flooring

Installed costs: LVP runs $5–$8/sq ft, engineered hardwood $8–$14/sq ft, solid hardwood $10–$18/sq ft, and tile $10–$20/sq ft. Subfloor repair adds $2–$5/sq ft where needed. Refinishing existing hardwood runs $3–$6/sq ft.

Drywall & Paint

New drywall installation (hang, tape, mud, texture) runs about $2–$4/sq ft of wall area. Interior painting for a full home typically ranges from $3,000–$8,000 depending on square footage, ceiling height, and trim complexity.

Trim & Millwork

Baseboard and crown molding replacement runs $3–$8/LF installed and painted. Wainscoting and board-and-batten range from $15–$30/LF. Custom built-ins are priced per project based on design complexity.

Electrical & Lighting

Recessed lighting, dimmer switches, updated outlets, and new circuit runs. Budget $150–$300 per recessed light installed, $200–$500 per new switch/outlet circuit, and $500–$1,500 for a panel upgrade if needed.

Project Scope

A single-room refresh typically runs $5,000–$25,000. A whole-home interior renovation with structural changes, new flooring, drywall, paint, and trim can range from $25,000–$100,000+. Most projects fall in the $50–$200 per square foot range. We provide a detailed, line-item estimate before committing to any work.

Ranges reflect typical Western Washington market pricing. Your project cost depends on scope, materials, and site conditions. Contact us for a personalized estimate.

Every estimate is free, detailed, and comes with zero pressure. Get your free interior remodel estimate →

Request Your Free Estimate

Fill out the form below and we'll get back to you within 24 hours.

By submitting, you agree to ourPrivacy Policy.

Areas We Serve

Apex Build & Remodel provides interior remodeling services across Western Washington, including:

TacomaSeattleBellevueGig HarborIssaquahKirklandMercer IslandPuyallupLake TappsBremertonRustonEnumclawBlack DiamondEdmondsWoodinville

Frequently Asked Questions

What counts as an 'interior remodel'?

Anything inside your home's exterior walls that isn't a standalone kitchen or bathroom project. This includes opening up floor plans by removing walls, adding or relocating interior walls, replacing flooring throughout the home, upgrading trim and millwork, finishing basements, converting rooms, and full-home refreshes (paint, flooring, fixtures, doors). If it changes how the inside of your home looks and functions, it's interior remodeling.

Can you remove a load-bearing wall?

Yes. We remove load-bearing walls regularly. It requires installing a properly sized header beam (LVL or steel) supported by posts that transfer the load to the foundation. We work with a structural engineer to size the beam correctly and ensure the load path is maintained. Permits and inspections are required, and we handle all of it.

How do you minimize dust and disruption during an interior remodel?

We isolate the work area with heavy-duty plastic dust barriers and zip walls. Negative air pressure machines with HEPA filters pull dust toward the work zone and away from your living space. We protect your floors with ram board or heavy drop cloths, and we clean up daily. For major demo work, we schedule it in concentrated blocks so the messiest phase passes quickly.

Do you handle permits for interior work?

Yes. Any structural changes, electrical work, or plumbing modifications require permits in Tacoma and most cities in our service area. Even some non-structural work — like adding a new room or changing the use of a space — may need a permit. We determine what's required during the planning phase and handle all applications and inspections.

How long does a whole-home interior remodel take?

It depends on scope. A single-room renovation (new flooring, paint, trim, light fixtures) can be done in 1–2 weeks. Opening up a floor plan with structural changes, new flooring throughout, updated lighting, and fresh paint for a whole level typically takes 6–10 weeks. A full-home remodel involving multiple rooms, structural work, and new systems can run 3–5 months. We provide a detailed timeline before starting.

Ready to Start Your Interior Remodeling Project?

Contact us today for a free, no-obligation estimate. We'll give you honest pricing and a clear plan.