Skip to main content
Exterior Remodeling

Exterior Remodeling in Tacoma & Western Washington

Siding, trim, windows, doors, and structural repairs — we protect your home from the outside in and make it look great from the curb.

5.0/5 (12)
60 Yrs Experience
Licensed & Insured
FREE Estimates

What We Do on the Outside of Your Home

Western Washington is hard on exteriors. Here's how we make yours stand up to the weather and look good for years.

Siding Replacement

We strip old siding, inspect and repair the sheathing underneath, install new weather-resistant barrier (Tyvek HomeWrap or equivalent), and apply your chosen siding — fiber cement (Hardie), LP SmartSide, cedar, or vinyl. All joints are caulked, corners are finished cleanly, and flashing details around windows and doors are done to manufacturer spec. No shortcuts on the layers you can't see.

Windows & Doors

We install energy-efficient replacement windows (double-pane, low-E glass, argon-filled) from brands like Milgard, Andersen, and Pella. Retrofit inserts for same-size openings, or full-frame replacements when we need to resize or reframe. Entry doors, patio sliders, and French doors are installed with proper pan flashing, sill drainage, and weatherstripping. Every installation is shimmed, insulated, and sealed — not just foam-and-forget.

Trim, Fascia & Soffit

Exterior trim takes the most weather abuse — especially fascia boards along the roofline and corner boards on exposed walls. We replace rotted trim with Hardie trim, PVC (Azek), or primed finger-joint cedar. Soffit panels are repaired or replaced with proper ventilation to keep your attic breathing and moisture-free. Everything is caulked, primed, and painted.

Structural Repairs

Water intrusion causes real damage over time — rotted rim joists, deteriorated mudsills, soft sheathing, and compromised wall framing. We sister in new framing members, replace damaged structural lumber, and address the water management issue that caused the rot in the first place. Band-aids don't work on structural problems; we do it right.

Exterior Painting & Finish

If your siding is sound but the paint is failing, a quality exterior paint job extends its life by a decade or more. We pressure wash, scrape, prime bare wood, caulk all joints, and apply two coats of premium exterior paint. We also prime and paint all new siding, trim, and fascia as part of any replacement project.

Water Management

Proper flashing, kick-out diverters, drip edges, and gutter integration are critical in our climate. We install Z-flashing at horizontal transitions, step flashing along roof-to-wall connections, and kick-out flashing where rooflines meet walls above lower sections. These details are what prevent the rot that ruins homes in Western Washington.

Exterior Remodel Results

Curb appeal transformations for homes across Tacoma and Western Washington.

Exterior remodel with new siding and trim on Tacoma home

Built for Pacific Northwest Weather

Western Washington averages 37+ inches of rain per year. Our homes face constant moisture exposure, moss growth, and the occasional wind storm. When we remodel an exterior, we don't just make it look new — we address the water management, ventilation, and material choices that determine whether your siding and trim last 5 years or 30 years.

With 15+ years of experience working on homes in this climate, we know where water gets in and how to keep it out. Every project includes proper flashing, sealed penetrations, and materials rated for our environment.

Exterior Remodel Cost Factors

Here's what determines the cost of your exterior project — and where your investment makes the biggest impact.

Siding Material

Vinyl is the most affordable ($4–$7/sq ft installed) but has a shorter lifespan and less curb appeal. Fiber cement (Hardie) runs $8–$14/sq ft installed and is our most popular choice for durability and appearance. Cedar siding costs $9–$16/sq ft installed and requires ongoing maintenance. LP SmartSide falls between fiber cement and cedar in price.

Window Replacement

Retrofit window inserts run $400–$800 per window installed. Full-frame replacements with new framing and flashing run $700–$1,500 per window. Premium brands and specialty shapes (bay windows, picture windows) cost more. A full-house window replacement for a typical home runs $10,000–$30,000.

Rot & Structural Repair

This is the variable that's hardest to predict before we strip the old siding. Localized trim rot might add $500–$2,000. Extensive sheathing and framing damage can add $5,000–$15,000+. We inspect thoroughly and provide updated pricing before proceeding with any repair work that wasn't in the original scope.

Home Size & Complexity

A single-story ranch with simple geometry costs less per square foot than a multi-story home with dormers, gables, bays, and multiple roof intersections. Height and access (scaffolding requirements) also affect labor cost. We account for all of this in our estimate.

Siding Replacement

$8,000 – $25,000

Full siding replacement with weather-resistant barrier, new flashing, and paint or factory finish.

Windows (Whole House)

$10,000 – $30,000

Energy-efficient replacement windows installed throughout the home with proper flashing and insulation.

Full Exterior Renovation

$20,000 – $75,000+

Complete exterior overhaul — siding, windows, trim, fascia, soffit, structural repairs, and paint.

Ranges reflect typical Western Washington market pricing. Your project cost depends on scope, materials, and site conditions. Contact us for a personalized estimate.

We provide free on-site estimates for all exterior remodel projects. Schedule your free estimate →

Request Your Free Estimate

Fill out the form below and we'll get back to you within 24 hours.

By submitting, you agree to ourPrivacy Policy.

Areas We Serve

Apex Build & Remodel provides exterior remodeling services across Western Washington, including:

TacomaSeattleBellevueGig HarborIssaquahKirklandMercer IslandPuyallupLake TappsBremertonRustonEnumclawBlack DiamondEdmondsWoodinville

Frequently Asked Questions

What siding materials work best in the Pacific Northwest?

Fiber cement (James Hardie) is our top recommendation for Western Washington. It's resistant to moisture, rot, and insects, holds paint for 15+ years, and comes with a 30-year warranty. It handles our wet winters and occasional freeze-thaw cycles better than wood or vinyl. LP SmartSide is another excellent option — engineered wood treated for moisture resistance with a strong warranty. We also install cedar siding for homeowners who want a natural look and don't mind periodic maintenance.

How long does an exterior remodel take?

Siding replacement on a typical Tacoma-area home takes 2–4 weeks. Window and door replacements can be done in 1–2 weeks for a full house. A comprehensive exterior remodel — siding, trim, windows, soffit, and fascia — typically takes 4–6 weeks. Weather can affect the schedule during winter months, but we plan around it and protect exposed areas between work sessions.

Do you fix rot before installing new siding?

Always. We never cover up damage. Before any new siding goes on, we remove all rotted sheathing, framing, trim, and sill plates and replace with new, treated lumber. In Western Washington, we commonly find rot around window and door frames, along the bottom course of siding, and behind improperly flashed decks. Fixing the substrate is the most important step — it's what your siding attaches to and what keeps your wall structure sound.

Will new siding improve my home's energy efficiency?

Yes, especially if we add or upgrade the weather-resistant barrier (house wrap) and insulation behind the siding. Many older homes in our area have minimal or degraded building paper and no exterior insulation. We install a high-quality WRB and can add rigid foam insulation board behind the siding, which significantly reduces heat loss and air infiltration. New windows paired with new siding make the biggest difference.

Do I need permits for exterior work?

Siding replacement in-kind (same material, same profile) usually doesn't require a permit. However, window replacements that change the opening size, structural repairs, adding or enlarging windows, and changes to the building envelope often do. If your home is in a historic district, additional design review may be required. We determine permit needs during the estimate and handle all paperwork.

Ready to Start Your Exterior Remodeling Project?

Contact us today for a free, no-obligation estimate. We'll give you honest pricing and a clear plan.