Skip to main content
Bathroom Remodeling

Bathroom Remodeling in Tacoma & Greater Seattle

Outdated tile, leaky fixtures, wasted space — we fix all of it. Walk-in showers, custom vanities, and bathrooms built to last.

5.0/5 (12)
60 Yrs Experience
Licensed & Insured
FREE Estimates

How We Build Your Bathroom

From gut demo to grout lines — here's every step of an Apex bathroom remodel.

1

Demo & Inspection

We strip out old tile, drywall, vanity, and fixtures down to the studs and subfloor. This is where we check for hidden damage — water rot, mold behind walls, outdated plumbing that needs replacing. If the subfloor is soft, we sister in new joists and lay fresh plywood before anything else goes in.

2

Rough-In Plumbing & Electrical

Supply lines, drain lines, and vent stacks get relocated or replaced as needed. We run new wiring for vanity lighting, exhaust fans (vented to the exterior, not the attic), GFCI outlets, and heated floors if you want them. Everything is inspected before we close up the walls.

3

Waterproofing & Cement Board

Cement backer board goes up on all wet walls. Shower areas get a full waterproof membrane system — Schluter Kerdi or equivalent — with sealed seams, corners, and curb. The shower pan is pre-sloped, waterproofed, and flood-tested before any tile goes on. This is the step most contractors cut corners on. We don't.

4

Tile Installation

Shower walls, floors, niches, and benches get tiled with your selected material — porcelain, ceramic, natural stone, or large-format slabs. We use proper thinset coverage (back-buttered for large tiles), consistent grout lines, and Schluter edge trim for clean exposed edges. Accent bands, patterns, and mosaic niches are all standard capabilities.

5

Vanity, Fixtures & Finishing

Your vanity is installed and leveled, countertop set, and sink plumbed. Toilet, faucets, showerhead, glass enclosure, mirrors, towel bars, and accessories go in. Paint, baseboards, and door trim finish the room. Final plumbing connections are tested, the exhaust fan is verified, and we do a detailed walkthrough with you.

Recent Bathroom Projects

Tile showers, vanity upgrades, and full gut remodels completed for homeowners in Tacoma and surrounding areas.

Custom tile walk-in shower remodel in Tacoma
Modern bathroom vanity and mirror installation
Bathroom tile work with built-in shower niche
Completed bathroom renovation with new fixtures
Full bathroom remodel with custom tile and glass enclosure
"Professional work and attention to detail — exceeded our expectations. The crew was respectful of our home and the finished product looks incredible."

— Apex Build & Remodel Client

Bathroom Remodel Cost Factors

Every bathroom is different. Here's what determines your final number.

Scope of Demo

A cosmetic update (swap vanity, re-paint, new hardware) costs far less than a full gut where we strip to studs and replace subfloor. Hidden water damage behind old tile can add to demo scope — we'll flag it early and price it transparently.

Tile Selection & Coverage

Floor tile only vs. floor-to-ceiling shower tile are very different labor costs. Large-format tiles (less grout, cleaner look) require more precision. Natural stone costs more than porcelain. Intricate mosaic patterns add labor time.

Plumbing Changes

Replacing fixtures in place is straightforward. Moving the shower to a different wall, adding a second sink, or relocating the toilet means rerouting supply and drain lines — which adds plumbing labor and may require opening up the floor.

Vanity & Countertop

A single-sink vanity from a showroom is one budget. A 60" double vanity with a quartz top, undermount sinks, and custom mirrors is another. We work with every range and help you prioritize where your dollars make the biggest impact.

Shower Enclosure

A shower curtain rod costs nothing. A frameless glass enclosure with a door and fixed panel typically runs $800–$1,500 installed. Semi-frameless options split the difference. We measure, order, and install.

Extras & Upgrades

Heated floor mats, rain showerheads, body sprays, lighted mirrors, built-in Bluetooth speakers — these finish touches can elevate a bathroom from functional to spa-like. We price them as line items so you can decide what's worth it.

Minor Update

$3,000 – $12,000

Vanity swap, new toilet, fresh paint, updated hardware, and flooring replacement. Plumbing stays in place.

Partial Remodel

$7,000 – $28,000

New tile shower or tub surround, vanity with countertop, fixtures, flooring, and lighting. Some plumbing updates.

Full Gut Remodel

$10,000 – $35,000+

Stripped to studs. Custom tile shower, double vanity, full plumbing and electrical rework, heated floors, frameless glass enclosure, and premium fixtures.

Ranges reflect typical Western Washington market pricing. Your project cost depends on scope, materials, and site conditions. Contact us for a personalized estimate.

We provide free, line-itemized estimates so you see exactly where every dollar goes. Request your estimate →

Request Your Free Estimate

Fill out the form below and we'll get back to you within 24 hours.

By submitting, you agree to ourPrivacy Policy.

Areas We Serve

Apex Build & Remodel provides bathroom remodeling services across Western Washington, including:

TacomaSeattleBellevueGig HarborIssaquahKirklandMercer IslandPuyallupLake TappsBremertonRustonEnumclawBlack DiamondEdmondsWoodinville

Frequently Asked Questions

How long does a bathroom remodel take?

A standard bathroom remodel takes 3 to 6 weeks. A half-bath update (vanity, toilet, paint, flooring) can be done in 1–2 weeks. Full master bathroom remodels with tile showers, new plumbing, and layout changes typically take 5–6 weeks. We provide a project-specific timeline before we start.

Can you convert my tub into a walk-in shower?

Yes — tub-to-shower conversions are one of our most requested projects. We remove the tub, re-route the drain, waterproof the shower pan, and build a custom tile shower in its place. We can add a bench, niche, glass enclosure, and linear drain. If you want to keep a tub option, we can also install a freestanding tub alongside the new shower.

What does waterproofing involve?

Every shower and wet area we build gets a full waterproofing system — not just a coat of paint-on membrane. We use Schluter Kerdi or equivalent sheet membrane over cement board, sealed at every seam and corner. The shower pan gets a bonded waterproof layer with a pre-slope to the drain. This prevents mold, rot, and leaks behind your tile for decades.

Do I need to pick all my materials before the project starts?

Ideally, yes. Material selections (tile, vanity, fixtures, hardware) should be finalized before we begin demo. This keeps the project on schedule and avoids delays. We help you through the selection process and can recommend suppliers in the Tacoma area where you can see materials in person.

Will the remodel affect my other bathrooms?

Only the bathroom being remodeled is out of commission during the project. We'll plan around your household so you always have access to at least one working bathroom. If we need to shut off water temporarily for plumbing tie-ins, we coordinate that with you in advance.

What's the cost of a bathroom remodel?

Bathroom remodels in the Tacoma/Seattle area typically range from $3,000 for a minor update up to $35,000+ for a full gut remodel. A partial remodel with new tile, vanity, and fixtures runs $7,000–$28,000. A full master bath with custom tile shower, double vanity, and new plumbing runs $10,000–$35,000+. Costs average $70–$400 per square foot depending on finishes. We provide a free, detailed estimate before any work starts.

Ready to Start Your Bathroom Remodeling Project?

Contact us today for a free, no-obligation estimate. We'll give you honest pricing and a clear plan.